Posts Tagged hotpoint washing machine spares
Hotpoint washing Machine Lights Flashing
Posted by admin in Engineers Service Call Repair Diary, Hotpoint Spares & Repairs News, Washing Spares and Repairs News on June 4th, 2009
Customer Service Call Request
Hotpoint washing Machine Lights Flashing
Engineers repair comments.
On inspection of the customers aqxxl129 Hotpoint washing machine i found that when the door was shut and the machine switched on by the on-off button on the washing machine the lights on the control panel were light correctly and on, but when i opened the washing machine door the lights flickered and went off, i tried this several times and the same fault occured. I removed the hotpoint washing machine top and the control board cover from the door, I had an idea that the wiring cabled were damaged as they are run through the door hinge but i wasn’t sure if Hotpoint supplied this as a spare part. On closer inspection of the wiring cables i found that one of the wires was loose as it entered in the terminal plug, i reconnected the wire and tested the Hotpoint washing machine it worked fine again, no Hotpoint washing machine spare parts needed this time.
Hotpoint Washing Machine Door Handle
Posted by admin in Engineers Service Call Repair Diary, Hotpoint Spares & Repairs News, Washing Spares and Repairs News on May 29th, 2009
Customer Service Call Request
I cannot open the door on my washing machine.
Engineers repair comments.
On inspection of the customers Wf321 Hotpoint washing machine i found that the washing machine door handle had broken, I removed the old broken door handle and replaced it with a new Hotpoint spare parts, the Hotpoint door handle part number is C00113820
Hotpoint Washing Machine Door Hinge
Posted by admin in Engineers Service Call Repair Diary, Hotpoint Spares & Repairs News, Washing Spares and Repairs News on May 23rd, 2009
Most Hotpoint Washing machine door hinges are made of a cast aluminium material, some hinges broke with the pressure of customers of children leaning on them. 
The door hinge shown fits Hotpoint washing machines and Hotpoint tumble dryers, the pins at the top and bottom of this door hinge has a habit of braking off.
Hotpoint Washing Machine Door Seal
Posted by admin in Engineers Service Call Repair Diary, Hotpoint Spares & Repairs News on May 16th, 2009
Hotpoint washing machine door seals are made of a flexible rubber material, They attach to the outer drum front plate and is held on via a spung loaded clip or a clip which is tightened by a nut and bolt system. It is then held onto the front cabinet of the Hotpoint washing machine via a spring clip. Most Hotpoint Washing Machine rubber door seals have a drainage hole or holes at the bottom of the seal, this allows excess water that has collected in the seal to drain away, so when it is time to take the washing out of the machine there is no water laying in the seal so the clothes stay dry. I will show a few of the most common washing machine door seals: 1605335 hotpoint rubber door seal 1603006 Hotpoint Rubber door gasket.
Hotpoint Washing Machine Pump
Posted by admin in Engineers Service Call Repair Diary, Hotpoint Spares & Repairs News on May 6th, 2009
Customer Service Call Request
There is water left in my washing machine at the end of a cycle.
Engineers repair comments.
On inspection of the Hotpoint washing machine wf440 i could hear that the drain pump impellor was not turning, So i lowered the drain hose to remove all the exsisting water from the machine, Then i removed the drain pump 1603290 from the pump housing to see if there was anything blocking the pump impellor from turning. I found an elastic band wound around the pump impellor. I removed the elastic band refitted the pump & housing then tested the machine and it now drains properly.
Hotpoint Washing Machine Bearings
Posted by admin in Engineers Service Call Repair Diary, Hotpoint Spares & Repairs News on April 23rd, 2009
Customer Service Call Request
My Wm63 Hotpoint washing machine is making a loud noise on the spin cycle.
Engineers repair comments.
On inspection of the washing machine i found that the drum bearings had shot, The hotpoint washing machine will require bearings & drum shaft kit to complete the repair, I advised the customer on the price of repair & they will let us know if they want to procced.